Skip to main content

SKIDSTEER QUICKATTACH ADAPTERS

SKIDSTEER QUICKATTACH ADAPTERS

Washburn Company has built over 650 different quick hitch adapters for many different loader makes and loader models

Washburn Company builds Skid steer loader quick hitch adapters and Skid steer loader quick hitch adapters conversions, convert your loader to a quick attach or attach to a different hitch setup.

We have a large selection of different quick hitch loader adapters.  We an adapt from Bobcat, John Deere, Euro, Global, Case-IH, Case uniloader, JCB, Terex, JLG, Case Backhoe, Westendorf, Kubota, Gehl, Bush Hog, Allied, New Holland, Ford, Mustang, Mahindra, Ford

Washburn Company converts to other styles besides skid steer, like Euro hitch, Global hitch

Any questions or need an economical custom buit quick hitch adapter or conversion just contact our friendly, helpful, knowledgeable crew to help you get what you need.

  • Quick Hitch Adapter Case 2200 to Skid Steer Attachment. Washburn company has made a pin on conversion for a Case 2200 to convert to standardized skid steer. A skid steer conversion is considered the "universal" adapter which most every one converts to. Case 2200 are standardized builds with specific measurements. Case 2200 comes with all new pins, pins are all 1 1/8". Case 2200 and others, fabricated by Washburn Company. Washburn Company specializes in all custom adapters, standard factory builds, bale spears and custom bale spear attachments. Quick Hitch Adapter Case 2200 to Skid Steer Attachment. Washburn company has made a pin on conversion for a Case 2200 to convert to standardized skid steer. A skid steer conversion is considered the "universal" adapter which most every one converts to. Case 2200 are standardized builds with specific measurements. Case 2200 comes with all new pins, pins are all 1 1/8". Case 2200 and others, fabricated by Washburn Company. Washburn Company specializes in all custom adapters, standard factory builds, bale spears and custom bale spear attachments.
    Washburn Company

    PIN ON CASE 2200 TO SKID STEER CONVERSION

    CASE 2200 TO SKID STEER Adapts to Case 2200; other adapters may be included but contact us for confirmation. Converts Pin On Case 2200 hookup and converts to standardized skid steer.
    $1,275.00
  • Quick Hitch Adapter Case 580 N to Skid Steer Attachment. Washburn company has made a pin on conversion for a Case 580 N to convert to standardized skid steer. A skid steer conversion is considered the "universal" adapter which most every one converts to. Case 580 and Case 580 N are standardized builds with specific measurements. Case 580 N comes with all new pins, pins are all 1 1/2". Quick Hitch Adapter Case 580 N to Skid Steer Attachment. Washburn company has made a pin on conversion for a Case 580 N to convert to standardized skid steer. A skid steer conversion is considered the "universal" adapter which most every one converts to. Case 580 and Case 580 N are standardized builds with specific measurements. Case 580 N comes with all new pins, pins are all 1 1/2".
    Washburn Company

    PIN ON CASE 580 SUPER N TO SKID STEER

    CASE 580 SUPER N TO SKID STEER Adapts to Case 580 N and M series, other adapters may be included but contact us for confirmation. Converts Pin On Case hookup to standardized skid steer.
    $1,650.00
  • CASE IH 1835C loader to Skid Steer, Case IH 1835 to universal skid steer, Case 1835 to skid steer, Washburn Company has fabricated the Case 1835, Case 1835B, Case 1835C and others. The Case 1835 is a standard factory build that Washburn Company has specialized in building for over 30 years. Washburn company fabricates any factory build, all custom builds as well as all bale spear, bale tine and bale stabber equipment and conversions. Case 1835C comes with all new pins, plates are made out of 3/8" plates triple passed on our heavy duty bareback. Washburn company makes all Case 1835C bale spears, 1835C conversions and 1835C bale stabber attachments. CASE IH 1835C loader to Skid Steer, Case IH 1845 to universal skid steer, Case 1835 to skid steer, Washburn Company has fabricated the Case 1835, Case 1835B, Case 1835C and others. The Case 1835 is a standard factory build that Washburn Company has specialized in building for over 30 years. Washburn company fabricates any factory build, all custom builds as well as all bale spear, bale tine and bale stabber equipment and conversions. Case 1835C comes with all new pins, plates are made out of 3/8" plates triple passed on our heavy duty bareback. Washburn company makes all Case 1835C bale spears, 1835C conversions and 1835C bale stabber attachments.
    Washburn Company

    PIN ON CASE IH 1835C TO SKID STEER

    PIN ON CASE IH 1835C TO SKID STEER Replacement Fits Pin ON CASE 1835C uni-loader skid steer. Converts CASE 1835C and other 1835 models to universal skid steer.
    MSRP: $1,395.00
    $1,275.00
  • Farmhand F11 to Skid steer This is Washburn Company's take on the OEM farmhand f11 series and others to skid steer. This attachment features 3/8" skidsteer boxes that are triple passed for supreme durability. The farmhand f11 has 1" top and center holes with 1 1/4" bottom holes. The two top holes are for a variety of different uses. The MF 300 is a compact tractor and hooked up to the skid steer multiples all usage and implements. Contact us at 800-283-7107 or 417-682-5551 for a quote today. We are custom fabrication shop that specializes in agriculture. Farmhand F11 to Skid steer This is Washburn Company's take on the OEM farmhand f11 series and others to skid steer. This attachment features 3/8" skidsteer boxes that are triple passed for supreme durability. The farmhand f11 has 1" top and center holes with 1 1/4" bottom holes. The two top holes are for a variety of different uses. The MF 300 is a compact tractor and hooked up to the skid steer multiples all usage and implements. Contact us at 800-283-7107 or 417-682-5551 for a quote today. We are custom fabrication shop that specializes in agriculture.
    Washburn Company

    PIN ON FARMHAND F11 TO SKID STEER

    PIN ON FARMHAND F11 TO SKID STEER The pictures above demonstrate Washburn company's take on the FarmHand F11 and some others compared to a stock factory OEM quick attach.
    $1,400.00
  • Converts a pin on Ford 3910 to run universal skid steer equipment. To adapt; simply pull all 4 pins, adapt the pin on side and you can now run any standardized skid steer equipment which is considered the "universal" adapter. Comes with all (4) new 1" pins. Converts a pin on Ford 3910 to run universal skid steer equipment. To adapt; simply pull all 4 pins, adapt the pin on side and you can now run any standardized skid steer equipment which is considered the "universal" adapter. Comes with all (4) new 1" pins.
    Washburn Company

    PIN ON FORD 3910 TO SKID STEER

    PIN ON FORD 3910 TO UNIVERSAL SKID STEER Converts a pin on Ford 3910 to run universal skid steer equipment. To adapt; simply pull all 4 pins, adapt the pin on side and you can now run any...
    $1,300.00
  • Washburn Company has made a factory Ford 7414 to universal skid steer. This adapter will allow you to pull your existing pins and hook directly to your loader to run skid steer equipment. Skid steer is the most widely accepted and universal build, converting nearly 80% of our builds to skid steer. Our Ford 7414 adapter comes with all new pins, DOM bushings and powder coated a Ford blue with bright safety red handles. Washburn Company has made a factory Ford 7414 to universal skid steer. This adapter will allow you to pull your existing pins and hook directly to your loader to run skid steer equipment. Skid steer is the most widely accepted and universal build, converting nearly 80% of our builds to skid steer. Our Ford 7414 adapter comes with all new pins, DOM bushings and powder coated a Ford blue with bright safety red handles.
    Washburn Company

    PIN ON FORD 7414 TO SKID STEER

    PIN ON FORD 7414 TO UNIVERSAL SKID STEER This unit will pin on to your existing Ford 7414 loader and allow you to run universal skid steer equipment. You will pull all 4 pins, adapt the pin on...
    $1,300.00
  • FORD 771 TO UNIVERSAL SKIDSTEER, WASHBURN COMPANY MAKES A FORD 771 AND OTHERS TO SKID STEER, FORD 771 CONVERSIONS. Washburn Company specializes in all custom adapters, contact us today if you don't see what you're looking for. This is a standard factory build FORD 771 to convert to the most universal skid steer adapter. FORD 771 conversions are wildly popular and readily available, contact us today for your conversion. FORD 771 TO UNIVERSAL SKIDSTEER, WASHBURN COMPANY MAKES A FORD 771 AND OTHERS TO SKID STEER, FORD 771 CONVERSIONS. Washburn Company specializes in all custom adapters, contact us today if you don't see what you're looking for. This is a standard factory build FORD 771 to convert to the most universal skid steer adapter. FORD 771 conversions are wildly popular and readily available, contact us today for your conversion.
    Washburn Company

    PIN ON FORD 771 TO SKID STEER

    PIN ON FORD 771 TO UNIVERSAL SKID STEER Converts a pin on Ford 771 to run universal skid steer equipment. You will pull all 4 pins, adapt the pin on side and be able to run any standardized skid...
    $1,275.00
  • Converts a pin on Ford 777B to run universal skid steer equipment. To adapt; simply pull all 4 pins, adapt the pin on side and you can now run any standardized skid steer equipment which is considered the "universal" adapter. Comes with all (4) new 1" pins. Converts a pin on Ford 777B to run universal skid steer equipment. To adapt; simply pull all 4 pins, adapt the pin on side and you can now run any standardized skid steer equipment which is considered the "universal" adapter. Comes with all (4) new 1" pins.
    Washburn Company

    PIN ON FORD 777B TO SKID STEER

    PIN ON FORD 777B TO UNIVERSAL SKID STEER Converts a pin on Ford 777B to run universal skid steer equipment. To adapt; simply pull all 4 pins, adapt the pin on side and you can now run any...
    $1,275.00
  • great bend ML265 or great bend 330 to universal skid steer. Washburn company has perfected this factory great bend ML265 to the most widely accepted universal skid steer adapter. Great bend 330 is a standard build with 3/8" brackets and 1" pins. Washburn Company makes a wide variety of great bends and other manufactures like John Deere, Kubota, Case, Tellehandler, etc. Give us a call to get your great bend started today! 800/283-7107 great bend ML265 or great bend 330 to universal skid steer. Washburn company has perfected this factory great bend ML265 to the most widely accepted universal skid steer adapter. Great bend 330 is a standard build with 3/8" brackets and 1" pins. Washburn Company makes a wide variety of great bends and other manufactures like John Deere, Kubota, Case, Tellehandler, etc. Give us a call to get your great bend started today! 800/283-7107
    WASHBURN CO.

    PIN ON GREAT BEND ML265 TO SKID STEER

    PIN ON GREAT BEND ML265 TO SKID STEER Great bend ML265 to universal skid steer You will pull your pins, hook up and this will allow you to run universal skid steer equipment.
    $1,275.00
  • JD 143 Loader to jd 500 Two crossbar design keeps the face of thee latch boxes in line and keeps them from twisting and going out of alignment. Latch box sides are 1/2" thick and are made from grade 50 plate for added strength. The latching pins are designed so that when the latches are closed the springs are bottomed out so that the pins cannot come unlatched. Bushing for pins Grease Zerk in both latching pin tubes Couples the two different Quick hitches as close as is physically possible for maintaining maximum lifting capacity. Quick attach adapters are also available for tractor loaders with pin on buckets to convert them to quick attach. JD 143 Loader to jd 500 Two crossbar design keeps the face of thee latch boxes in line and keeps them from twisting and going out of alignment. Latch box sides are 1/2" thick and are made from grade 50 plate for added strength. The latching pins are designed so that when the latches are closed the springs are bottomed out so that the pins cannot come unlatched. Bushing for pins Grease Zerk in both latching pin tubes Couples the two different Quick hitches as close as is physically possible for maintaining maximum lifting capacity. Quick attach adapters are also available for tractor loaders with pin on buckets to convert them to quick attach.
    Washburn Company

    PIN ON JD 143 TO JD 500

    PIN ON JD 143 TO JD 500 This pin on conversion allows you to run John Deere 500 series from your JD 143 loader.  This conversion will pin on to your JD 143 loader and allow you to run any JD 500...
    $1,350.00
  • JD 148 & 158 Loader to Skid-Steer Attachment Adapter Two crossbar design keeps the face of thee latch boxes in line and keeps them from twisting and going out of alignment. Latch box sides are 1/2" thick and are made from grade 50 plate for added strength. The latching pins are designed so that when the latches are closed the springs are bottomed out so that the pins cannot come unlatched. Bushing for pins Grease Zerk in both latching pin tubes Couples the two different Quick hitches as close as is physically possible for maintaining maximum lifting capacity. Quick attach adapters are also available for tractor loaders with pin on buckets to convert them to quick attach. Adapter JD 148 Lgreat bend ML265 or great bend 330 to universal skid steer. Washburn company has perfected this factory great bend ML265 to the most widely accepted universal skid steer adapter. Great bend 330 is a standard build with 3/8" brackets and 1" pins. Washburn Company makes a wide variety of great bends and other manufactures like John Deere, Kubota, Case, Tellehandler, etc. Give us a call to get your great bend started today! 800/283-7107oader to Skid-Steer Attachment conversion
    Washburn Company

    PIN ON JD 146 TO SKID STEER

    PIN ON JD 146 TO SKID STEER This pin on conversion allows you to run universal skid steer equipment. This conversion will pin on to your JD 146 loader and allow you to run any universal skid...
    $1,275.00
  • Converts a Pin On Kubota LA 1154 to use standardized skid steer equipment. The latching pins are designed so that when the latches are closed the springs are bottomed out so that the pins cannot come unlatched. Grease Zerk in both latching pin(please grease prior to use) (tubes for an additional $60). Converts a Pin On Kubota LA 1154 to use standardized skid steer equipment. The latching pins are designed so that when the latches are closed the springs are bottomed out so that the pins cannot come unlatched. Grease Zerk in both latching pin(please grease prior to use) (tubes for an additional $60).
    Washburn Company

    PIN ON KUBOTA LA 1154 TO SKID STEER

    PIN ON KUBOTA LA 1154 TO SKID STEER Converts a Pin On Kubota LA 1154 to use standardized skid steer equipment Heavy duty construction throughout.
    $1,275.00
  • Converts a Pin On Mahindra ML 275 to use standardized skid steer equipment. Two crossbar design keeps the face of the latch boxes in line and keeps them from twisting and going out of alignment. Comes with all new (4) 1" pins. Grease Zerk in both latching pins. Converts a Pin On Mahindra ML 275 to use standardized skid steer equipment. Two crossbar design keeps the face of the latch boxes in line and keeps them from twisting and going out of alignment. Comes with all new (4) 1" pins. Grease Zerk in both latching pins.
    Washburn Company

    PIN ON MAHINDRA 275 TO SKID STEER

    PIN ON MAHINDRA 275 TO SKID STEER The pictures above demonstrate Washburn company's take on the Mahindra ML 275 to a universal skid steer adapter. 
    $1,275.00
  • Mahindra TO UNIVERSAL SKIDSTEER, WASHBURN COMPANY MAKES A Mahindra AND OTHERS TO SKID STEER, Mahindrra CONVERSIONS. Washburn Company specializes in all custom adapters, contact us today if you don't see what you're looking for. This is a standard factory build Mahindra to convert to the most universal skid steer adapter. Mahindra conversions are wildly popular and readily available, contact us today for your conversion. Mahindra TO UNIVERSAL SKIDSTEER, WASHBURN COMPANY MAKES A Mahindra AND OTHERS TO SKID STEER, Mahindrra CONVERSIONS. Washburn Company specializes in all custom adapters, contact us today if you don't see what you're looking for. This is a standard factory build Mahindra to convert to the most universal skid steer adapter. Mahindra conversions are wildly popular and readily available, contact us today for your conversion.
    Washburn Company

    PIN ON MAHINDRA ML 112 TO SKID STEER

    PIN ON MAHINDRA ML 112 TO SKID STEER The pictures above demonstrate Washburn company's take on the Mahindra ML 112 compared to a stock factory quick attach.
    $1,275.00
  • Converts a Pin On Mahindra to use standardized skidsteer equipment. Grease Zerk in both latching pinS. (4) 1.125" pins. Converts a Pin On Mahindra to use standardized skidsteer equipment. Grease Zerk in both latching pinS. (4) 1.125" pins.
    Washburn Company

    PIN ON MAHINDRA TO SKID STEER

    PIN ON MAHINDRA TO SKID STEER The pictures above demonstrate Washburn company's take on the mahindra compared to a stock factory quickattach. We bu
    $1,275.00
  • Massey Ferguson 300 to Skid steer This is Washburn Company's take on the OEM massey ferguson 300 series and others to skid steer. This attachment features 3/8" skidsteer boxes that are triple passed for supreme durability. The MF 300 has 1" top and center holes with 1 1/4" bottom holes. The two top holes are for a variety of different uses. The MF 300 is a compact tractor and hooked up to the skid steer multiples all usage and implements. Contact us at 800-283-7107 or 417-682-5551 for a quote today. We are custom fabrication shop that specializes in agriculture. Massey Ferguson 300 to Skid steer This is Washburn Company's take on the OEM massey ferguson 300 series and others to skid steer. This attachment features 3/8" skidsteer boxes that are triple passed for supreme durability. The MF 300 has 1" top and center holes with 1 1/4" bottom holes. The two top holes are for a variety of different uses. The MF 300 is a compact tractor and hooked up to the skid steer multiples all usage and implements. Contact us at 800-283-7107 or 417-682-5551 for a quote today. We are custom fabrication shop that specializes in agriculture.
    Washburn Company

    PIN ON MASSEY FERGUSON 300 TO SKID STEER

    PIN ON MASSEY FERGUSON TO SKID STEER The pictures above demonstrate Washburn company's take on the Massey Ferguson 300 compared to a stock factory OEM quick attach.
    $1,375.00
  • Washburn Company makes a pin on mustang 2050 loader. You will pull 4 pins on your loader, attach the mustang side and it will allow you to run standardized skid steer equipment. This is a 6 plate job, 3/8" plates used. Comes with 4 new pins, pins are 1 1/4". Made with 2" OD DOM x 1 1/4" ID Contact us for any additional details or specs. Washburn Company makes a pin on mustang 2050 loader. You will pull 4 pins on your loader, attach the mustang side and it will allow you to run standardized skid steer equipment. This is a 6 plate job, 3/8" plates used. Comes with 4 new pins, pins are 1 1/4". Made with 2" OD DOM x 1 1/4" ID Contact us for any additional details or specs.

    PIN ON MUSTANG 2050 TO SKID STEER

    MUSTANG 2050 TO SKID STEER This adapter will pin directly to your mustang 2050 and others, loader. Pull 4 pins on your loader, attach the mustang side and it will allow you to run standardized...
    $1,450.00
  • Washburn Company has made a custom Trima 1420 to universal skid steer adapter. The Trima 1420 is manufactured by Alo which is a company based out of Sweden. Washburn Company has taken custom measurements from the customer directly and converted this to the most widely recognized and accepted universal skid steer conversion. The universal skid steer is widely recognized so units, bale spears and conversions are typically cheaper, lighter duty and more economical for lighter loaders. Contact us today at 800-283-7107 Washburn Company has made a custom Trima 1420 to universal skid steer adapter. The Trima 1420 is manufactured by Alo which is a company based out of Sweden. Washburn Company has taken custom measurements from the customer directly and converted this to the most widely recognized and accepted universal skid steer conversion. The universal skid steer is widely recognized so units, bale spears and conversions are typically cheaper, lighter duty and more economical for lighter loaders. Contact us today at 800-283-7107
    Washburn Company

    PO TRIMA 1420 TO SKIDSTEER

    TRIMA 1420 TO SKID STEER Pin On Trima 1420 series and other to standardized skid steer attachments You will simply pull your pins, pin on to your existing Trima 1420 and it will allow you to run...
    MSRP: $1,499.00
    $1,300.00
  • John Deere Euro Global H480 Loader To Fit Skid Steer Attachments Two crossbar design keeps the face of thee latch boxes in line and keeps them from twisting and going out of alignment. Latch box sides are 1/2" thick and are made from grade 50 plate for added strength. The latching pins are designed so that when the latches are closed the springs are bottomed out so that the pins cannot come unlatched. Bushing for pins Grease Zerk in both latching pin tubes Couples the two different Quick hitches as close as is physically possible for maintaining maximum lifting capacity. Quick attach adapters are also available for tractor loaders with pin on buckets to convert them to quick attach. John Deere Euro Global H480 Loader To Skid Steer Attachments
    Washburn Company

    JOHN DEERE H480 (EURO 2) TO SKID STEER

    JD H480 LOADER TO SKID STEER Loader hitch adapter for John Deere H480 to Standardized Skid steer attachments Hooks up to any John Deere H480 series loader also known as Euro 2
    $1,600.00
!