GREAT BEND 660 TO SKIDSTEER

WASHBURN CO.

(No reviews yet) Write a Review
$1,150.00
Availability:
Requires 10-14 days to complete
Shipping:
Calculated at Checkout
Adding to cart… The item has been added

Product Overview

GREAT BEND 660 TO SKIDSTEER

  • Great bend 660 to universal skidsteer
  • You will pull your pins, hook up and this will allow you to run universal skidsteer equipment.
  • Made with 3/8" plates
  • Measurement from center pin hole to center is 12"
  • Comes with (4) 1 1/8" pins
  • 2" DOM bushings
  • Center to center bracket spacing is 37 3/4"
  • This 2 cross bar design keeps the face of thee latch boxes in line and keeps them from twisting and going out of alignment.
  • Latch box sides are 3/8" thick and are made from grade 50 plate for added strength and tripple passed.
  • Grease zerks come ungreased and must be greased prior to use.
  • The latching pins are designed so that when the latches are closed the springs are bottomed out so that the pins cannot come unlatched.
  • Thin design for maximum lift capacity
  • 5000# lifting capacity
  • ALL adapters are custom built and will require a 2-3 week lead time.
  • SOME more popular items are in stock and will ship out ASAP.
  • If you are not sure give us a call to get a real shipping estimate.
  • Each schematic will be approved by customer prior to shipping out.
  • Once the schematic is approved by the customer, and built to those specifications we are no longer required to take back the adapter for any reason.
  • It is very important that you take time to fill out the schematic or provide us with accurate specs for your happiness and ours.

__________________________________________________________________________________________________________________________

  • FULL DISCLAIMER: FACTORY WARRANTY IS NULL AND VOID WHEN OUR PRODUCT IS MODIFIED, OR IF THE PRODUCT HAS BEEN SUBJECT TO MISUSE, NEGLECT OR ACCIDENT. 
  • There are a wide variety of companies that produce “front end loaders,” which means there is also a wide variety of designs.
  • The angle of the plate varies from 0 to 30 degrees from vertical.
  • Washburn’s has concluded that using a back plate of 10 degrees would be the best angle suited for MOST loader-adapter combinations.
  • BASED OFF OF THIS INFORMATION; PLEASE check your loader to make sure your attachments will hook up properly and have sufficient range of motion.

SHIPPING

  • Ships by truck to many locations, for the cheapest quote add a business name and address at check out. 
  • Freight to a business location must have posted hours, forklift, & loading dock and located within city limits
  • Residential deliveries are $55+ higher.
  • LTL Company will NOT be responsible for unloading pallet. If assistance is needed a $75 charge will incur.
  • A family owned business since 1976, for over 40 years!
  • Thanks for your interest in our products.
  • This unit can also be picked up at our facility located at Washburn Farm & Home Supply at 172 NE 1St LN, Lamar, Mo 64759.
  • We are located on the outer road on the east side of 71 highway about 2 miles north of US 160. Stop by and see us.
  • We Ship to the US48. Hawaii, Alaska, and Canada are also available for additional fees.

CONTACT INFORMATION

  • We are open Monday-Friday from 8:00 am - 5:00pm, Central time
  • Contact us at 800-2837107 or 417-682-5551
  • Email: info@hayspear.com
  • Fax: 417-682-3987
  • Located at 172 NE 1st Ln. Lamar, Mo. 64759
  • We are a family owned business since 1976, over 40 years of bringing innovative products to customers in the US
  • FULL DISCLAIMER: FACTORY WARRANTY IS NULL AND VOID WHEN OUR PRODUCT IS MODIFIED, OR IF THE PRODUCT HAS BEEN SUBJECT TO MISUSE, NEGLECT OR ACCIDENT. 

 

Thank you,

 

Alan, Joanne and Crew

 

 

 

 

Reviews

(No reviews yet) Write a Review