PIN ON MASSEY FERGUSON TO SKID STEER

• The pictures above demonstrate Washburn company's take on the Massey Ferguson 300 compared to a stock factory OEM quick attach.
• We build with 3" tube to keep the frame from bending and coming out of alignment.
• Converts a Pin On Massey Ferguson 300 and other series to use standardized skid steer equipment
• Heavy duty construction throughout.
• Massey Ferguson brackets are cut with 3/8" plates can be upgraded to 1/2" plate for additional up charge.
• Two crossbar design keeps the face of thee latch boxes in line and keeps them from twisting and going out of alignment.
• Latch box sides are 3/8" thick and are made from grade 50 plate for added strength.
• The latching pins are designed so that when the latches are closed the springs are bottomed out so that the pins cannot come unlatched.
• Grease Zerk in both latching pin (grease prior to use)
• Made with 1 1/4" ID x 2" OD DOM bottom bushings 
• Top and center bushings made with 1" ID x 2" OD DOM.
• Comes with all new pins; (2) 1" pins and (2) 1 1/4" pins.
• Inside brackets are centered at 33 1/4"
• Outer brackets are centered at 41"
• Center to center on top pin hole is 12" with a 7" kick out. 
• Center to center on middle pin is 16 1/2" with a 5" kick out.
• The adapter comes with two top pin holes, this helps 
  to offer more flexibility in controlling implement position, lifting power, and depth, especially when using the draft control feature
  .
• The choice of hole depends on the type of implement and the ground conditions
• Couples the two different Quick hitches as close as is physically possible for maintaining maximum lifting capacity.
• Quick attach adapters are also available for tractor loaders with pin on buckets to convert them to quick attach.
• Solid 3" x 1 1/2" rectangular cross bars.
• ALL adapters are custom built and will require a 2-3 week lead time.
• SOME more popular items are in stock and will ship out ASAP.
  Top hole
  Connecting the top link to the upper hole on the three-point hitch is for:
  • Heavy ground-engaging work, like plowing.
  • Deep tillage, such as ripping or chisel plowing.
  • Maximum depth control, as it increases the sensitivity of the hydraulic draft control system. In this position, the tractor can react more quickly to changes in soil resistance.
  • Greater lifting power for the implement. 
  Bottom hole
  The lower top link hole is used for:
  • Lighter implements that are not ground-engaging, such as mowers, brush hogs, or landscape rakes.
  • Providing a greater range of motion, allowing the implement to drop lower. This can be useful for implements with low connection points or when operating on uneven terrain.
  • Less responsive draft control, as the top link is less angled

 ___________________________________________________________

• FULL DISCLAIMER: FACTORY WARRANTY IS NULL AND VOID WHEN OUR PRODUCT IS MODIFIED, OR IF THE PRODUCT HAS BEEN SUBJECT TO MISUSE, NEGLECT OR ACCIDENT. 
• There are a wide variety of companies that produce “front end loaders,” which means there is also a wide variety of designs.
• The angle of the plate varies from 0 to 30 degrees from vertical.
• Washburn’s has concluded that using a back plate of 10 degrees would be the best angle suited for MOST loader-adapter combinations.
• BASED OFF OF THIS INFORMATION; PLEASE check your loader to make sure your attachments will hook up properly and have sufficient range of motion.
• Note if your adapter has bump stops. Revision may be needed.
• This item will NOT fit if your attachment or bucket has bump stops.

SHIPPING

• Live freight quotes available BEFORE checkout!
• Product is over 150# and will ship LTL truck freight
• Ships by truck to many locations, for the best freight quote; ship to a business location with posted hours, forklift, & loading dock.
  
• If FedEx has to unload the skid, a $75+ fee will be passed to the customer directly.
• Residential deliveries are $65+ higher.
• A family owned business since 1976 over 40 years
• Thanks for your interest in our products.
• This unit can also be picked up at our facility located at Washburn Farm & Home Supply at 172 NE 1St LN, Lamar, Mo 64759.
• We are located on the outer road on the east side of 71 highway about 2 miles north of US 160. Stop by and see us.
• We Ship to the US48. Hawaii, Alaska, and Canada are also available for additional fees.

CONTACT INFORMATION

• We are open Monday-Friday from 8:00 am - 4:00pm, Central time
• Contact us at 800-2837107 or 417-682-5551
• Email: info@hayspear.com
• Fax: 417-682-3987
• Located at 172 NE 1st Ln. Lamar, Mo. 64759
• We are a family owned business since 1976, our 40th year of bringing innovative products to customers in the US