JRB 416 TO SKID STEER

This adapter hooks up to a quick attach JRB wheel loader and converts to standardized skid steer
Built with heavy duty material throughout, welded to our HD or XHD bareback.
JRB 416 brackets are plasma cut out of 1" OR upgrade to 1 1/2" grade 50 steel.
Adapter is sent without wear plates.
Wear plates can be purchased additionally
Most adapters will NOT need them unless you are purchasing 1 1/2" plate upgrade and plan to lift over #10,000
Brackets inside to inside is 29" spacing
Bottom hole is 2.06"
This two crossbar design keeps the face of thee latch boxes in line and keeps them from twisting and going out of alignment.
Latch box sides are 3/8" thick and are made from grade 50 plate for added strength.
The latching pins are designed so that when the latches are closed the springs are bottomed out so that the pins cannot come unlatched.
This adapter can fit various wheel loaders, give us a call to confirm it will fit your wheel loader.
Brackets are for flat back buckets and wheel loaders.
Any loader that has bump stops is considered an "after factory" product and will NOT fit without modifications.
It is under the customers discretion to let us know if there are bump stops or not.
5000# Rating
All adapters are built to order.
We are a small, family owned business in Lamar, Mo.
Please allow 10-14 days on ALL builds.
We do have a rush fee, contact us to jump in line!

MADE IN LAMAR, MO. USA

FITMENT WARNING

Adapting a JRB 416 to skid steer results in significant fitment issues, including but not limited to:

Mismatch in coupler geometry, leading to unsafe or partial engagement.
excessive coupler weight, reducing rated lifting capacity and increasing stress on the boom arms.
Attachment height and angle misalignment, preventing proper function of buckets or tools.
Interference with visibility, ground clearance, or hydraulic routing.
Incompatibility with standard skid steer attachments, even if locked.
Do NOT assume compatibility without engineering validation or testing.

OPERATOR RESPONSIBILITY

Inspect coupler and attachment engagement before every use.
Verify locking pins are fully seated and secured.
Do not exceed rated capacity of the skid steer or other conversion.
Use only with properly rated matched attachments.
Avoid lifting personnel or overhead loads.
This is a CUSTOM modification with no OEM endorsement although a common conversion.
Washburn Company assumes no responsibility for injuries, equipment damage or losses related to this.
By installing or operating this configuration, you assume full legal and operational responsibility.

Live quotes now available online at checkout!
Ships by truck to many locations, for the best quote, ship to a business location with posted hours, forklift, & loading dock.
Residential deliveries are $65+ higher.
Any assistance needed unloading the skid will result in a fee directly to the customer, starting at $75.00
For the cheapest quote enter a business address at check out!
A family owned business since 1976 for over 40 years.
Thanks for your interest in our products.
This unit can also be picked up at our facility located at Washburn Farm & Home Supply at 172 NE 1St LN, Lamar, Mo 64759.
We are located on the outer road on the east side of 71 highway about 2 miles north of US 160. Stop by and see us.
We Ship to the US48. Hawaii, Alaska, and Canada are also available for additional fees.

We are open Monday-Friday from 8:00 am - 4:00pm, Central time
Contact us at 800-2837107 or 417-682-5551
Email: info@hayspear.com
Fax: 417-682-3987
Located at 172 NE 1st Ln. Lamar, Mo. 64759
We are a family owned business since 1976, over 40 years of bringing innovative products to customers in the US

Thank you,

Washburn Crew