Skip to main content

JD 48-58, 178

JD 48-58, 178
  • John Deere 48-58 Loader to JD 500 series attachment adapter John Deere 48-58 Loader to JD 500 series attachment adapter
    Washburn Company

    JOHN DEERE 48-58 TO JD 500 SERIES CONVERSION

    JOHN DEERE 48-58 TO JD 500 SERIES Adapts to John Deere 48 and 58 pin on series Comes with all new (3) 1 1/4" pins Outside to outside plate is 41" Inside to inside inner plate is 31 1/8" apart Center tilt cylinder has a 2" gap with outer...
    $1,150.00
  • JD Loader 48-58 Pin On to JD 148-158 Quick Attach Adapter JD Loader 48-58 Pin On to JD 148-158 Quick Attach Adapter Conversion
    Washburn Company

    JOHN DEERE 48-58 PIN ON TO JD 148-158 QUICK ATTACH

    JD 48-58 PIN ON TO JD 148-158 QUICKIE This unit allows you to pull your pins and convert to the JD 148/158 quickie conversion. By no longer pulling pins you simply have a handle that drops down for a quick and easy adaption Adapts to standardized...
    $1,150.00
  • JOHN DEERE 148-158 TO EURO GLOBAL JOHN DEERE 148-158 TO EURO GLOBAL
    Washburn Company

    JOHN DEERE 148-158 TO EURO GLOBAL

    JD 148 AND 158 TO EURO GLOBAL Fits pin on style john deere 148 and 158 series. Converts the JD 148/158 to Euro, global and alo loaders. Made out of 3/8" plate and 1 1/2" shaft Top bar is solid 1 1/2" shaft and is 50 1/8" long Center euro bar is...
    $1,200.00
  • JD 145 Loader TO Euro Global JD H Series Attachments Adapter JD 145 Loader TO Euro Global JD H Series Attachments Adapter
    Washburn Company

    JOHN DEERE 145 TO EURO, GLOBAL CONVERSION

    JD 145 TO EURO, GLOBAL, JD H SERIES Converts from a pin on John Deere 145 to Euro Global equipment Fits standardized pin on JD 145 Runs any standard euro global attachments Comes with all new 1" x 6 7/16" long top pins Top bushings are made with...
    $1,200.00
  • JD 148-158 TO JOHN DEERE 600-700 ADAPTER

    JD 148-158 TO JOHN DEERE 600-700 ADAPTER

    JD 148-158 LOADER TO JD 600/700 To adapt this unit you will simply pull all 4 of your existing pins, hook the loader and use all 4 new pins to install. This unit will hook flushed to your JD 148/158 loader and allow you to run JD 600/700 series...
    $1,200.00
  • JOHN DEERE 148/158 PIN ON TO JD 148-158 QUICK ATTACH JOHN DEERE 148/158 PIN ON TO JD 148-158 QUICK ATTACH

    JOHN DEERE 148/158 PIN ON TO JD 148-158 QUICK ATTACH

    JOHN DEERE 148/158 PIN ON TO 148-158 QUICK ATTACH Converts pin on style John Deere JD 148 158 style loaders to quick attach so pin removal is not needed to change attachments. For this adapter you will pull all 4 of your existing pins, replace with...
    $1,150.00
  • JD 148 & 158 Loader to Skid-Steer Attachment Adapter Two crossbar design keeps the face of thee latch boxes in line and keeps them from twisting and going out of alignment. Latch box sides are 1/2" thick and are made from grade 50 plate for added strength. The latching pins are designed so that when the latches are closed the springs are bottomed out so that the pins cannot come unlatched. Bushing for pins Grease Zerk in both latching pin tubes Couples the two different Quick hitches as close as is physically possible for maintaining maximum lifting capacity. Quick attach adapters are also available for tractor loaders with pin on buckets to convert them to quick attach. Adapter JD 148 Loader to Skid-Steer Attachment conversion
    Washburn Company

    PIN ON JD 148-158 TO SKIDSTEER

    PIN ON JD 148 & 158 TO SKIDSTEER This pin on conversion allows you to run universal skid steer equipment. Pull all pins and this will come with all new (4) 1 1/8" pins. 1 1/8" ID x 2" OD DOM bushing Close coupling for maintaining maximum...
    $1,100.00
  • JD 148/158 TO EURO, GLOBAL JD 148/158 TO EURO, GLOBAL
    Washburn Company

    JD 148/158 TO EURO, GLOBAL

    PIN ON JOHN DEERE 148/158 TO EURO Pin On JD 148/158 to Euro global loader. Pin On JD 148/158 to use standardized euro hook up JD 148/158 brackets made with 3/8" plate JD brackets have 2" x 2" tubing to keep plates from twisting New 1 1/4" Pins...
    $1,250.00
  • JD 48-58 Loader w/Center Tilt Cylinder Adapter to fit Standardized Skid Steer Attachments Two crossbar design keeps the face of thee latch boxes in line and keeps them from twisting and going out of alignment. Latch box sides are 1/2" thick and are made from grade 50 plate for added strength. The latching pins are designed so that when the latches are closed the springs are bottomed out so that the pins cannot come unlatched. Bushing for pins Grease Zerk in both latching pin tubes Couples the two different Quick hitches as close as is physically possible for maintaining maximum lifting capacity. Quick attach adapters are also available for tractor loaders with pin on buckets to convert them to quick attach. JD 48-58 w/Center Tilt Cylinder Adapter to fit Standardized Skid Steer
    Washburn Company

    JOHN DEERE 48-58 TO SKIDSTEER

    JD 48-58 W/ CENTER TILT CYLINDER TO SKIDSTEER Converts JD 48 and JD 58 loader w/center tilt cylinder to standardized skid steer attachments Allows you to run skid-steer and Bobcat implements from your JD 48-58 loader Comes with all new (3) 1 1/4"...
    $1,100.00
  • PO JD 175 TO SKIDSTEER, PIN ON JOHN DEERE 175 AND OTHER LOADERS TO UNIVERSAL SKIDSTEER. WASHBURN COMPANY HAS MADE AND SPECIALIZED IN ALL JOHN DEERE UNITS AND CONVERSIONS. THIS BUILD IS A FACTORY JD 175 TO UNIVERSAL SKIDSEER WITH HEAVY DUTY CONSTRUCTION THROUGHOUT, 1 YEAR WARRANTY, WELDS TRIPLE PASSED. PO JD 175 TO SKIDSTEER
    Washburn Company

    PO JD 175 TO SKIDSTEER

    JD 175 TO SKIDSTEER Pin On JD 175 to standardized skid steer attachments You will simply pull your pins, pin on to your existing JD 175 and it will allow you to run any standardized skid steer. There are many hitches and we are glad to see if this...
    MSRP: $1,499.00
    $1,150.00
!