Skip to main content

CAT IT ADAPTERS & SPEARS

CAT IT ADAPTERS & BALESPEARS

Washburn Company specializes in Cat IT 28 brackets. Here we plasma cut 1" and 1 1/2" brackets to be fabricated onto our balespear units, conversions or bare brackets for at home fabrication jobs.

 

 

  • Heavy duty tree and post puller. Hoses not included Hoses are not included
    Washburn Company

    HEAVY DUTY TREE & POST PULLER- CHOOSE BRACKET

    TREE PULLER Choose any bracket backing to fit your implement We customize any bracket to fit, call us if you don't see your bracket option Pulls smaller trees, less than 6" diameter Comes with hydraulic cylinder only. No Hoses. ALL adapters are...
    $2,450.00
  • Washburn Company has made a Cat 420D and Cat 420E to universal skid steer conversion. This conversion will allow you to run any universal skid steer equipment directly from your Cat 420D and Cat 420E loader. The Cat 420D/E loader is a quick attach loader Washburn Company has made a Cat 420D and Cat 420E to universal skid steer conversion. This conversion will allow you to run any universal skid steer equipment directly from your Cat 420D and Cat 420E loader. The Cat 420D/E loader is a quick attach loader
    Washburn Company

    CAT 420D/E TO UNIVERSAL SKIDSTEER ADAPTER

    CAT 420 D/E TO UNIVERSAL SKIDSTEER Hooks up to a Cat 420 D and E loaders. Converts to any standardized skid steer Allows you to run skid steer implements from your Cat 420 D and E loader. Heavy duty construction throughout. Option of 1"...
    $1,600.00
  • CUSTOM 12V HD LINEAR ACTUATOR BLANK BACK, ANY HOOK UP CUSTOM 12V HD LINEAR ACTUATOR BLANK BACK, ANY HOOK UP
    Washburn Company

    CUSTOM 12V HD LINEAR ACTUATOR BLANK BACK, ANY HOOK UP

    CUSTOM 12V LINEAR ACTUATOR SKIDSTEER BLANK BACK CHOOSE YOUR OWN HOOK UP This listing is for a 12V linear actuator skid-steer blank back, choose your hook up! The linear actuator is custom built for us by Thompson. It is heavy duty ball and screw...
    $3,500.00
  • Cat It 28 Loader To Bobcat Skid Steer Attachments Adapter Heavy duty construction throughout. Two crossbar design keeps the face of thee latch boxes in line and keeps them from twisting and going out of alignment. Latch box sides are 1/2" thick and are made from grade 50 plate for added strength. The latching pins are designed so that when the latches are closed the springs are bottomed out so that the pins cannot come unlatched. Bushing for pins Grease Zerk in both latching pin tubes Couples the two different Quick hitches as close as is physically possible for maintaining maximum lifting capacity. Quick attach adapters are also available for tractor loaders with pin on buckets to convert them to quick attach. CAT IT 28 TO SKID STEER ADAPTER
    Washburn Company

    CAT IT 28 TO SKID STEER ADAPTER

    CAT IT 28 TO SKIDSTEER Hooks up to a Cat It 28 Loader Converts to any standardized skid steer Allows you to run skid steer implements from your Cat IT Heavy duty construction throughout. Option of 1" (standard) or 1 1/2" thickness for an...
    $1,600.00
  • 15 SPEAR TWIN BRUSH RAKE ON 7 1/2" FRAME 15 SPEAR TWIN BRUSH RAKE ON 7 1/2" FRAME
    Washburn Company

    15 SPEAR TWIN BRUSH RAKE ON 7 1/2" FRAME

    Cat IT 15 SPEAR, 7 1/2' WIDE TWIN BRUSH GRAPPLE Twin grapple fits a standard Cat IT Features 15 spears. Your choice of 33", 39" or 48" Individual Spear rating is 3000# at 30" load center 7 1/2 feet wide 36" Tall; open height is 80" Custom...
    $4,849.00
  • Attachment Brackets to fit Caterpillar QT TH255 Loader Attachment Brackets to fit Caterpillar QT TH255 Loader
    Washburn Company

    CATERPILLAR QT TH255 BRACKET (PAIR)

    CATERPILLAR QT TH255 BRACKETS Brackets fit Caterpillar Quick attach TH255 series Call us for various fits Plasma cut out of 1" metal Measures 21 1/2" long Available in 1 1/2" brackets upon request Weights about 101# These caterpillar brackets...
    $500.00
  • Attachment Bracket pair to fit Cat IT 28 Loader Hitch
    Washburn Company

    CAT IT 28 BRACKET- PAIR

    CAT IT 28 BRACKETS Cat IT 28 brackets to help build your own implement Easily weldable to a bucket 1" OR 1 1/2" x 8" x 28" Made from 1" OR 1 1/2" thick plate. Contact us to make sure this is the right plate for you loader Proudly Made IN USA in...
    $600.00
  • Class 2 Pallet Forks fit on skid steer plate 4000lb rating Class 2 Pallet Forks fit on skid steer plate 4000lb rating
    Washburn Company

    CLASS 2 PALLET FORK, 48" LONG, #4000- CHOOSE YOUR BRACKETS

    CLASS 2 PALLET FORK, 48" LONG, #4000- CHOOSE YOUR BRACKETS Adapts to a standardized skid steer if no option is choose.  Pallet Forks are 48 inches long overall Skid-steer plate is 48 inches wide Forks have a 4000 lb rating This is...
    $1,150.00
  • skidsteer 2 spear, universal 2 spear, universal bale spear, skidsteer bale spear, skidsteer double spear, skidsteer double tine, skidsteer bale spear, stinger, spike prong, skidsteer 2 spear with ball, skidsteer with receiver hitch, receiver hitch for skidsteer, skidsteer 2 spear, universal 2 spear, universal bale spear, skidsteer bale spear, skidsteer double spear, skidsteer double tine, skidsteer bale spear, stinger, spike prong.
    Washburn Company

    SKIDSTEER 2 SPEAR W/ BALL AND RECEIVER HITCH

    SKIDSTEER 2 SPEAR W/ BALL AND RECEIVER HITCH, 48" SPEARS Hay bale stacker and mover for a skid steer or bobcat. Comes with a goose neck ball and receiver hitch hook up. Most people prefer the added ball on top for moving trailers and vehicles. Hay...
    $825.00
  • Blank Skid Steer Adapter Plate for Skid Steer Attachments C1 double reinforced on the bottom Blank Skid Steer Adapter Plate for Skid Steer Attachments C1 made with high strength grade 50 plate
    Washburn Company

    Blank Skid Steer Adapter Plate for Skid Steer Attachments C1

    Blank Skid Steer Adapter Plate for Skid Steer Attachments C1 Skid steer attachment adapter plate Model C1 for Skid steer attachments and standardized adapters. Skid-steer bobcat loader frame attachment adapter adapts most any implement to the...
    $200.00
  • Skid steer quick attach adapter to fit front end tractor loader or older skid steer, uni-loader or skid loader. This is the wide version for fitting wider frame loaders. Front end loader attachments Skid Steer quick attach conversion adapter is simply designed to fit onto your Pin-On loader and easily convert it into a Skid Steer loader. This simple and economical solution, is fitted with the exclusive Universal Mounting plates which can be positioned horizontally to fit your loader frame width. We punch the hole in the plates to fit your loader pin size which accommodates virtually any brand loader that uses 3/4, 1, 1 1/8, 1 1/4" for most standard pin sizes. 3000# capacity UNIVERSAL SKIDSTEER W/ 3 POSITION ROLLBACK (8296)
    WASHBURN CO.

    UNIVERSAL SKIDSTEER W/ 3 POSITION ROLLBACK (8296)

    UNIVERSAL SKID STEER W/ 3 POSITION ROLLBACK (8296) Skid steer quick attach adapter to fit front end tractor loader or older skid steer, uni-loader or skid loader. This is the wide version for fitting wider frame loaders. Front end loader...
    $850.00
  • UNIVERSAL SKID STEER ADAPTER 2/ 3 POSITION ROLL BACK- 8297 UNIVERSAL SKID STEER ADAPTER 2/ 3 POSITION ROLL BACK- 8297
    WASHBURN CO.

    UNIVERSAL SKID STEER ADAPTER 2/ 3 POSITION ROLL BACK- 8297

    UNIVERSAL SKIDSTEER W/3 POSITION ROLLBACK (8297) Universal skid steer adapter fits many tractor loaders with tilt cylinder arms directly above boom lift arms Skid steer quick attach adapter to fit front end tractor loader or older skid steer,...
    MSRP: $899.00
    $750.00
  • Skid Steer Hitch Adapter With Blank Heavy Duty Frame Skid Steer Hitch Adapter With Blank Heavy Duty Frame
    Washburn Company

    BLANK HEAVY DUTY SKIDSTEER ADAPTER FRAME

    BLANK HEAVY DUTY SKIDSTEER ADAPTER FRAME Quick Attach Skid steer adapter hitch with blank back for attaching your own attaching brackets for your loader. Heavy duty 2 cross bar construction This design keeps the face of thee latch boxes in line and...
    $750.00
  • SKID STEER LATCH BOX SET, MAKE YOUR OWN SKID STEER ADAPTER SKID STEER LATCH BOX SET, MAKE YOUR OWN SKID STEER ADAPTER
    Washburn Company

    SKID STEER LATCH BOX SET, MAKE YOUR OWN SKID STEER ADAPTER

    SKID STEER LATCH BOX SET, MAKE YOUR OWN SKID STEER ADAPTER Skid steer latch box set is for a pair of skid steer latching boxes. Make your own adapter and use these well designed connectors for starting your conversion unit to fit your application...
    $475.00
  • Skid Steer Hitch Adapter with Blank EXTRA Heavy Duty Frame Bobcat Hitch Adapter with Blank EXTRA Heavy Duty Frame
    Washburn Company

    SKIDSTEER ADAPTER W/ BLANK EXTRA HD FRAME

    SKIDSTEER W/ BLANK EXTRA HEAVY DUTY FRAME Quick Attach Skid steer adapter hitch with blank back for attaching your own attaching brackets for your loader. Extra heavy duty 2 cross bar construction Must be used on loaders with center tilt...
    $850.00
  • Hitch Adapter Case 570LXT Loader to Skid Steer Attachments, Quick Hitch Adapter Case 570 LXT/MXT to Skid Steer Attachment. Washburn company has made a pin on conversion for a Case 570 MXT to convert to standardized skid steer. A skid steer conversion is considered the "universal" adapter which most every one converts to. Case 570 Lxt and Case 570 MXT are standardized builds with specific measurements. Case 570 LXT/MXT comes with all new pins, pins are all 1 1/2". WASHBURN COMPANY SPECIALIZES IN ALL CUSTOM ADAPTERS, BALE SPEARS, UNITS, FACTORY UNITS AND CUSTOM SCHEMATICS. Hitch Adapter Case 570LXT Loader to Skid Steer Attachments, Quick Hitch Adapter Case 570 LXT/MXT to Skid Steer Attachment. Washburn company has made a pin on conversion for a Case 570 MXT to convert to standardized skid steer. A skid steer conversion is considered the "universal" adapter which most every one converts to. Case 570 Lxt and Case 570 MXT are standardized builds with specific measurements. Case 570 LXT/MXT comes with all new pins, pins are all 1 1/2". WASHBURN COMPANY SPECIALIZES IN ALL CUSTOM ADAPTERS, BALE SPEARS, UNITS, FACTORY UNITS AND CUSTOM SCHEMATICS.
    Washburn Company

    PIN ON CASE 570 LXT/MXT TO SKIDSTEER

    PIN ON CASE 570 LXT/MXT CONVERTS TO SKIDSTEER Pull your pins on your Case 570LXT/MXT and convert to run skid steer. Runs any standardized skid steer equipment This adapter has ALL the same dimensions BUT the brackets are different. A print will need...
    $1,500.00
!