Product Overview
CASE 570 MXT TO SKIDSTEER
- Adapts to a Case 570 MXT Quick Attach
- Case 570 MXT to Quick Attach series
- Converts Case to Standardized Skid steer attachments
- The measurement from the bottom hook to center pin is 25 3/8"
- This also fits SOME M and N Series loaders, give us a call for a schematic specification.
- This 2 cross bar design keeps the face of thee latch boxes in line and keeps them from twisting and going out of alignment.
- Latch box sides are 3/8" thick and are made from grade 50 plate for added strength.
- Grease zerks in latch box inners come ungreased, grease prior to use.
- The latching pins are designed so that when the latches are closed the springs are bottomed out so that the pins cannot come unlatched.
- Thin design for maximum lift capacity
- 5000# lifting capacity
- ALL adapters are custom built and will require a 2-3 week lead time.
- SOME more popular items are in stock and will ship out ASAP.
- If you are not sure give us a call to get a real shipping estimate.
- Every adapter may be different or custom, call with any questions or alterations.
- Because every adapter may be different, each customer is required to fill out a schematic drawing to meet specifications.
- The schematic drawing is to ensure that you get the right adapter and that we build it to your standards.
- Each schematic will be approved by customer prior to shipping out.
- Once the schematic is approved by the customer, and built to those specifications we are no longer required to take back the adapter for any reason.
- It is very important that you take time to fill out the schematic or provide us with accurate specs for your happiness and ours.
________________________________________________________________________________________________________________________
- FULL DISCLAIMER: FACTORY WARRANTY IS NULL AND VOID WHEN OUR PRODUCT IS MODIFIED, OR IF THE PRODUCT HAS BEEN SUBJECT TO MISUSE, NEGLECT OR ACCIDENT.
- There are a wide variety of companies that produce “front end loaders,” which means there is also a wide variety of designs.
- The angle of the plate varies from 0 to 30 degrees from vertical.
- Washburn’s has concluded that using a back plate of 10 degrees would be the best angle suited for MOST loader-adapter combinations.
- BASED OFF OF THIS INFORMATION; PLEASE check your loader to make sure your attachments will hook up properly and have sufficient range of motion.
- **IF YOUR ADAPTER HAS A BUMP STOP THIS UNIT WILL NEED ADJUSTMENTS- PLEASE CALL!**
SHIPPING
- Ships by truck to many locations, for the cheapest quote add a business name and address at check out.
- Freight to a business location must have posted hours, forklift, & loading dock and located within city limits
- Residential deliveries are $90 higher.
- A family owned business since 1976, for over 40 years!
- Thanks for your interest in our products.
- This unit can also be picked up at our facility located at Washburn Farm & Home Supply at 172 NE 1St LN, Lamar, Mo 64759.
- We are located on the outer road on the east side of 71 highway about 2 miles north of US 160. Stop by and see us.
- We Ship to the US48. Hawaii, Alaska, and Canada are also available for additional fees.
CONTACT INFORMATION
- We are open Monday-Friday from 8:00 am - 5:00pm, Central time
- Contact us at 800-2837107 or 417-682-5551
- Email: info@hayspear.com
- Fax: 417-682-3987
- Located at 172 NE 1st Ln. Lamar, Mo. 64759
- We are a family owned business since 1976, over 40 years of bringing innovative products to customers in the US
- FULL DISCLAIMER: FACTORY WARRANTY IS NULL AND VOID WHEN OUR PRODUCT IS MODIFIED, OR IF THE PRODUCT HAS BEEN SUBJECT TO MISUSE, NEGLECT OR ACCIDENT.
Thank you,
Alan, Joanne and Crew