CASE 570 MXT TO SKIDSTEER

• Adapts to a Case 570 MXT Quick Attach
• Case 570 MXT to Quick Attach series
• Converts Case to Standardized Skid steer attachments
• The measurement from the bottom hook to center pin is 25 3/8"
  
• This also fits SOME M and N Series loaders, give us a call for a schematic specification.
• This 2 cross bar design keeps the face of thee latch boxes in line and keeps them from twisting and going out of alignment.
  
• Latch box sides are 3/8" thick and are made from grade 50 plate for added strength.
• Grease zerks in latch box inners come ungreased, grease prior to use.
• The latching pins are designed so that when the latches are closed the springs are bottomed out so that the pins cannot come unlatched.
• Thin design for maximum lift capacity
• 5000# lifting capacity
• ALL adapters are custom built and will require a 2-3 week lead time.
• SOME more popular items are in stock and will ship out ASAP.
• If you are not sure give us a call to get a real shipping estimate.
• Every adapter may be different or custom, call with any questions or alterations.
• Because every adapter may be different, each customer is required to fill out a schematic drawing to meet specifications.
• The schematic drawing is to ensure that you get the right adapter and that we build it to your standards.
• Each schematic will be approved by customer prior to shipping out.
• Once the schematic is approved by the customer, and built to those specifications we are no longer required to take back the adapter for any reason.
• It is very important that you take time to fill out the schematic or provide us with accurate specs for your happiness and ours.

________________________________________________________________________________________________________________________

• FULL DISCLAIMER: FACTORY WARRANTY IS NULL AND VOID WHEN OUR PRODUCT IS MODIFIED, OR IF THE PRODUCT HAS BEEN SUBJECT TO MISUSE, NEGLECT OR ACCIDENT. 
• There are a wide variety of companies that produce “front end loaders,” which means there is also a wide variety of designs.
• The angle of the plate varies from 0 to 30 degrees from vertical.
• Washburn’s has concluded that using a back plate of 10 degrees would be the best angle suited for MOST loader-adapter combinations.
• BASED OFF OF THIS INFORMATION; PLEASE check your loader to make sure your attachments will hook up properly and have sufficient range of motion.
• **IF YOUR ADAPTER HAS A BUMP STOP THIS UNIT WILL NEED ADJUSTMENTS- PLEASE CALL!**

SHIPPING

• Ships by truck to many locations, for the cheapest quote add a business name and address at check out. 
• Freight to a business location must have posted hours, forklift, & loading dock and located within city limits
• Residential deliveries are $90 higher.
• Lift gate fee starts at $75+
• A family owned business since 1976, for over 40 years!
• Thanks for your interest in our products.
• This unit can also be picked up at our facility located at Washburn Farm & Home Supply at 172 NE 1St LN, Lamar, Mo 64759.
• We are located on the outer road on the east side of 71 highway about 2 miles north of US 160. Stop by and see us.
• We Ship to the US48. Hawaii, Alaska, and Canada are also available for additional fees.

CONTACT INFORMATION

• We are open Monday-Friday from 8:00 am - 5:00pm, Central time
• Contact us at 800-2837107 or 417-682-5551
• Email: info@hayspear.com
• Fax: 417-682-3987
• Located at 172 NE 1st Ln. Lamar, Mo. 64759
• We are a family owned business since 1976, over 40 years of bringing innovative products to customers in the US
• FULL DISCLAIMER: FACTORY WARRANTY IS NULL AND VOID WHEN OUR PRODUCT IS MODIFIED, OR IF THE PRODUCT HAS BEEN SUBJECT TO MISUSE, NEGLECT OR ACCIDENT. 

Thank you,

Alan, Joanne and Crew